Wiring Connections

Printable .pdf format.

For the ARS-01, the leads from the CA-01 cable should be connected as follows:

For the ARS-01S, the leads from the CA-01 cable should be connected as follows:

Red Lead	+10 VDC
White Lead	Power Common (0 VDC)
Black Lead	Signal Common (+5 VDC Internally Generated Reference Voltage)
Yellow Lead	Signal

For the ARS-06, the leads from the CA-06 cable should be connected as follows:

For the ARS-06S, the leads from the CA-06 cable should be connected as follows:

For the ARS-09, the leads should be connected as follows:

For the ARS-09S, the leads should be connected as follows:

Red Lead	+8 VDC
White Lead	Power Common (O VDC)
Black Lead	Signal Common (+4.1 VDC Internally Generated Reference Voltage)
Yellow Lead	Signal

For the ARS-12B, the leads should be connected as follows:

For the Dynacube™, the leads from the CA-04A cable should be connected as follows:

For the Dynacube -S, the leads from the CA-04A cable should be connected as follows:

Red Lead	+10 VDC
White Lead	Power Common (0 VDC)
Black Lead	Signal Common (+5 VDC Internally Generated Reference Voltage)
Brown Lead	X-Axis Signal
Orange Lead	Y-Axis Signal
Yellow Lead	Z-Axis Signal

Dynacube^™ is a registered trademark of A-Tech Corporation dba ATA Sensors.